jimmy pictures ken rampin kenny / john perry storage help GIT LIST milder threadlocker(s) spoke wrench big wide footpegs new chain trail tech rally trip computer super ice engine coolant? Fram CH6015 oil filter cable luber & lube tire tools / spoons (with 27mm on end?) - denniskirk.com i thinks tool bag and essential tools Uni Air Filter part # NU-4130ST (has the built in baffle screen?) extra master link to carry extra spark plug to carry TSR Suspension saver for front forks while transporting Fox Offroad Tracker Boots Aluminum buckles Pivot buckle system Anatomically contoured shin plate Prices starting at $129.95 http://www.chaparral-racing.com/Chaparral/product_family.asp?family%5Fid=6624&gift=False&0=dept%2Easp%2Cdept%5Fid%3D1443%26menu%5Fid%3D%26Tree%3D%2CFox&1=dept%2Easp%2Cdept%5Fid%3D10%26menu%5Fid%3D%26Tree%3D0%2CFox%20Boots&mscssid=5C60608560A74C28BF7ACC37BE6C9936 TO DO change oil / flush coolant? / adjust valves tweak rear subframe and muffler back into position & loctite loctite front caliper bolts? seal around current uni air filter and figure out the fitment of it and the backfire screen etc. put protective tubing or guide on front brake cable etc. - redo this with bigger tubing on the brake line redo skid plate bolts with threadlocker get an extra master link to carry foot peg fix - tap on through with bigger bolt and back nut? lock tite other bolt mod air box with mesh or bullit uni plugs check spark plug for health inspect shock settings and pressures etc. new odometer bearing thing to eliminate it etc. change/fill/flush figure out whats going on with the coolant grippy seat cover lengthen swingarm 2" when i get new chain and rear brake line etc. WISH LIST small AC fans for radiators radiator guards shark fin rear disc guard shock brush guards super bright headlight system someday 8" halogen or HID - low beam option to not be so bright but save regulator? helmet HID lights? billet throttle tube rear rack - http://www.promotobillet.com/shop/item.asp?itemid=26 rear rack pack I have two of the promoto racks. I mounted, with bolts, a chase harper rectanular tank bag (expandable) on the rack grippy seat riding gloves and boots jacket of some sort that breaks the wind Same here, did the fix myself after it broke on me, drilled and tapped both holes to 7/16" NFT and put stainless grade 8 bolts in, the front one i drilled all the way through and put a nut on the back side, that was 4 months afetr I bought the bike new, never had a problem since, do the clutch bushing(only $12) and the countershaft seal ($6), also buy a new kickstart retainer bolt, add some blue locktite and clean the threads in the shaft(that bolt like to come loose), and everything else is all standard maintinance. The price sounds bad to me, I'm looking to get mroe for mine out here, going in the trader next week for $3600, should go quick though as most in the trader are over $3800.